// Q&A · Rubber Tracks
How are rubber tracks measured on a mini excavator or dozer?
Expert Answer
Rubber tracks are measured by three numbers: width, pitch, and link count. The usual format is width x pitch x links, such as 230x96x33, and that is the safest way to identify the correct replacement for a mini excavator or dozer.
Start with the width, measured straight across the outside of the track in millimeters. Next measure the pitch, which is the center-to-center distance between two adjacent metal inserts or drive lugs. Finally, count the total number of links/inserts around the full loop. If your machine uses a rubber track with embedded steel cores, those inserts are the points you count.
A few practical tips help avoid mistakes: measure the old track when possible, not just the machine plate; take the measurement in millimeters; and do not confuse pitch with width, since a small error can make the track too tight or too loose. If the track is badly worn, stretched, cracked, or deformed, compare both sides of the machine and check the model, serial number, and undercarriage layout before ordering.
You should also look for wear symptoms that suggest more than just a size issue: uneven edge wear, jumping on the sprocket, excessive slack, or a track that rides off-center can point to tension problems or worn rollers, idlers, or sprockets/segments. On dozers, the same width x pitch x links principle applies, but the undercarriage setup and track chain style make accurate identification even more important.
VANROCK manufactures rubber tracks for 350+ machinery brands. We are an independent manufacturer and are not affiliated with any OEM brand named on a machine plate. VANROCK sells exclusively through an appointed dealer network, and pricing is quoted on request, so the best approach is to send the full track code, machine model, and any photos of the old track or nameplate for confirmation before ordering.
Answered by VANROCK specialists · Published 9/26/2026
Need This Part?
VANROCK manufactures premium undercarriage parts for 9,000+ machine models
Related Questions
- Which rubber tracks fit the IHI IS12JX mini excavator, and what VANROCK option is available? →
- What Hitachi EX40-2 tracks and undercarriage parts does VANROCK supply? →
- What rubber tracks fit the Gehl 353 mini excavator, and which VANROCK option is available? →
- What rubber tracks fit the Kobelco SK35SR-3, and which VANROCK option is available? →
- Do you supply rubber tracks for the IHI IS35J mini excavator? →
- What rubber tracks fit the Mustang ME1503, and which VANROCK option is available? →

