// Q&A · Track Tension & Alignment

How do you measure excavator track tension and know if it is too tight or loose?

Expert Answer

Excavator track tension is usually checked by measuring track sag at the center of the undercarriage, but the exact method and target value depend on the machine model and running conditions. If the track is too tight, it can accelerate wear on pins, bushings, rollers, idlers, and sprockets; if it is too loose, the track may derail or ride unevenly.

A common field check is to raise one side of the machine enough to unload the track, then measure the vertical gap or sag at the center of the bottom run. Some manufacturers specify a sag range in millimeters, while others give a measured dimension between the track chain and a reference point on the frame or roller. Always use the service specification for your excavator model, because the correct setting can differ between steel and rubber tracks, and between mini excavators and larger machines.

Symptoms of incorrect tension are easy to spot:

• Too tight: stiff travel, faster undercarriage wear, higher fuel load, and heat buildup

• Too loose: track slap, poor drive engagement, derailment risk, and uneven wear

• Uneven side-to-side tension: machine pulls to one side or tracks wear differently

For a reliable reading, check tension on level ground, with the undercarriage clean and after the machine has been operated enough for the track to settle. VANROCK supplies undercarriage parts for excavators and quotes on request through its dealer network. If you need the correct track or replacement components for your machine, fitment should be confirmed from the model and serial details.

Answered by VANROCK specialists · Published 11/8/2026

Need This Part?

VANROCK manufactures premium undercarriage parts for 9,000+ machine models

Related Questions

By clicking Accept All Cookies, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. Cookie Notice